Introduction to Limits

...

Once you get it set you will see dots on the card under user avatar:

• Red if at least one red aging limit is exceeded

• Yellowif at least one amber aging limit is exceeded (and no red limit exceeded)

• Otherwise Green

Once you put mouse over it you will see all the detail.

...

The same level configuration could be done for column groups. Click Edit on any column group and navigate to limits section to do similar configurations you did for columns.

Board level Aging Limits

Coming soonIn addition to Aging/Cycle Time limits for columns/groups you can define board level limits - aka define aggregated limit of time you wan the tickets sit in selected columns.

To make it done we renamed Personal WIP configuration to make it Board Limits were you now have 2 tabs - 1) Personal WIPs applied to board and 2) Aging/Cycle Time applied to the board as well.

...

When you click on it and select Aging tab you would need to turn on “Enable Aging limit“ toggle.

...

Now you can define:

• what columns you want to add to calculation

• amber limit (if applicable)

• red limit (if applicable)

Once you add it the counter close to Board Limits will increase to +1 or +2 appropriately.

Such configuration will also enable green/yellow/red dots on the issue cards signaling if any of the limits met. Once you move over it you will see all the limits exceeded with details.